Research on slag-resistance of ZrN-SiAlON-SiC-C composite refractory in different atmospheres

The ZrN-SiAlON composite powder was synthesized using low-grade zircon and bauxite by carbothermal reduction nitridation at first and then ZrN-SiAlON-SiC-C composite refractory were fabricated with the ZrN-SiAlON powder, SiC particles, and a small amount of Si powder as raw materials and sucrose as the binder. The slag resistance of these composites in O₂, N₂ and Ar atmosphere was investigated by X-ray diffraction, scanning electron microscopy, and energy dispersion spectra. The results show that the pores in the inside of ZrN-SiAlON-SiC-C composite refractory were enlarged in oxygen atmosphere due to oxidation, which leads to the decrease in slag resistance. In argon atmosphere, blast furnace slag destroyed the sintered body of zircon, corundum, and cristobalite with the formation of CaZrO₃, then infiltrated into and filled the pores inside the refractory to form a dense layer, which hindered the further erosion of the blast furnace slag. In the reducing atmosphere, the interfacial energy of the gas-liquid phases became larger due to the reactions between blast furnace slag liquid and the gas, resulting in a larger wetting angle which prevented the erosion.     

Neutron Diffraction and Neutron Radiography Investigation into Powder Sintering of Ti/Al and TiH2/Al Compacts

Metallurgical and Materials Transactions B - Sintering behaviors of two types of powder compact, i.e., Ti/Al and TiH2/Al, under vacuum were studied using in situ neutron diffraction, in situ...     

基于结构化遮挡编码和极限学习机的局部遮挡人脸识别

提出使用结构化遮挡编码（SOC）结合极限学习机（ELM）的算法来处理人脸识别中的遮挡问题。首先，使用SOC去除图像上的遮挡物，将遮挡物体与人脸分离开；同时，通过局部性约束字典（LCD）来估计遮挡物的位置，建立遮挡字典和人脸字典。然后，将建立好的人脸字典矩阵进行归一化处理，并利用ELM对归一化的数据进行分类识别。最后，在AR人脸库上进行的仿真实验结果表明，所提方法对不同遮挡物和不同区域遮挡的图像具有较好的识别率和鲁棒性。     

A Versatile Theranostic Nanoemulsion for Architecture‐Dependent Multimodal Imaging and Dually Augmented Photodynamic Therapy

To design a clinically translatable nanomedicine for photodynamic theranostics, the ingredients should be carefully considered. A high content of nanocarriers may cause extra toxicity in metabolism, and multiple theranostic agents would complicate the preparation process. These issues would be of less concern if the nanocarrier itself has most of the theranostic functions. In this work, a poly(ethylene glycol)‐boron dipyrromethene amphiphile (PEG‐F₅₄‐BODIPY) with 54 fluorine‐19 (¹⁹F) is synthesized and employed to emulsify perfluorohexane (PFH) into a theranostic nanoemulsion (PFH@PEG‐F₅₄‐BODIPY). The as‐prepared PFH@PEG‐F₅₄‐BODIPY can perform architecture‐dependent fluorescence/photoacoustic/¹⁹F magnetic resonance multimodal imaging, providing more information about the in vivo structure evolution of nanomedicine. Importantly, this nanoemulsion significantly enhances the therapeutic effect of BODIPY through both the high oxygen dissolving capability and less self‐quenching of BODIPY molecules. More interestingly, PFH@PEG‐F₅₄‐BODIPY shows high level of tumor accumulation and long tumor retention time, allowing a repeated light irradiation after a single‐dose intravenous injection. The “all‐in‐one” photodynamic theranostic nanoemulsion has simple composition, remarkable theranostic efficacy, and novel treatment pattern, and thus presents an intriguing avenue to developing clinically translatable theranostic agents.     

Corrosion protection of aluminum alloy by epoxy coatings containing polyaniline modified graphene additives

In the study, polyaniline/reduced‐graphene oxide (PANI‐RGO) composites, fabricated by loading 2, 5, and 8wt% graphene oxide, was prepared by in‐situ emulsion polymerization and reduction. They are characterized by Fourier transform infrared spectroscopy, X‐ray diffraction, and scanning electron microscopy. Epoxy coatings adding PANI and PANI‐RGO composites were coated on the surface of AA5083 Al alloy. The anticorrosion performance of the coatings is measured by electrochemical impedance spectroscopy and potentiodynamic polarization curve in 3.5wt% NaCl solution. The results demonstrate that the epoxy/PANI‐RGO coating exhibits a better protection against AA5083 alloy corrosion compared with the epoxy/PANI coating. Enhancement of the passivation performance of PANI was obtained by the addition of RGO into epoxy/PANI coating system.     

激光立体成形TC4钛合金的热力场演化

激光立体成形能够实现高性能复杂零件的精确成形，但成形过程中的高温度梯度极易导致残余应力和变形，最终影响构件的几何精度和力学性能。通过搭建基板单边夹持原位热变形测量系统，探究了多道多层TC4钛合金成形件在激光立体成形过程中基板温度、变形的演化规律，分析了不同扫描策略对构件热应力场的影响。研究结果表明，构件的变形发展受其热历史驱使，扫描策略对成形件的热变形具有显著影响。     

超临界二氧化碳干气密封相态分布规律与密封性能研究

以超临界二氧化碳干气密封为研究对象，分别以维里方程、Lucas方程描述二氧化碳真实气体效应、黏度的变化，在考虑阻塞流效应的同时，采用有限差分法对考虑离心惯性力效应的Reynolds方程与能量控制方程进行耦合求解，分析讨论了工况参数与槽形结构参数对其相态分布规律与密封性能的影响。研究表明：S-CO₂从密封端面进口至出口的流动过程中，如果工况参数设置合理，将由超临界态逐渐转变为气态，并不会出现液态；较低的进口压力、进口温度以及转速，均会容易导致潜在的凝结流动发生；相比于工况参数对相态分布的影响，槽形参数对相态分布的影响较小，近乎可以忽略；开启力除了随进口温度的升高而减小外，均随进口压力、转速、槽深、螺旋角的增大而增大；泄漏率随进口温度和转速的增大而减小，但其随进口压力、槽深、螺旋角的增大而增大。这些结果为进一步研究超临界二氧化碳干气密封提供了一定的支撑。     

水泥辊压机终粉磨系统的工业化应用

介绍了水泥辊压机终粉磨系统及运行情况,与辊压机联合粉磨系统生产的水泥以及所配制的混凝土进行了对比,水泥辊压机终粉磨系统电耗大幅降低,两种水泥所配制的混凝土性能相当。